Installation and Settings
ID #1030
How do I setup the WT8010 adapter with your service?
In SIP Configuration page, please set:
Register Server Address: outgoing.future-nine.com (if outgoing only) or incoming.future-nine.com (if both ways)
Register Server Port: 5060
Register Username: <your 8-digit Future Nine username>
Register Password: <your 10-characters Future Nine password>
Detect Interval Time: 300
DTMF Mode: DTMF_RFC2833
Enable Register: yes
Enable Pub Outbound Proxy: NO
Local SIP Port: 5060 (unless your ISP blocks it - if so set to something else)
Register Expire Time: 3600
Everything else leave at default.
In Advanced SIP Configuration page, please set:
STUN Server Address: stun.future-nine.com
Enable SIP Stun: Yes
Enable Private Register: NO
Enable Private Outbound Proxy: NO
Everything else leave at default.
Share this page:
Register Server Address: outgoing.future-nine.com (if outgoing only) or incoming.future-nine.com (if both ways)
Register Server Port: 5060
Register Username: <your 8-digit Future Nine username>
Register Password: <your 10-characters Future Nine password>
Detect Interval Time: 300
DTMF Mode: DTMF_RFC2833
Enable Register: yes
Enable Pub Outbound Proxy: NO
Local SIP Port: 5060 (unless your ISP blocks it - if so set to something else)
Register Expire Time: 3600
Everything else leave at default.
In Advanced SIP Configuration page, please set:
STUN Server Address: stun.future-nine.com
Enable SIP Stun: Yes
Enable Private Register: NO
Enable Private Outbound Proxy: NO
Everything else leave at default.
Tags: -
Related entries:
Last update: 2009-04-23 19:12
Author: Nitzan Kon
Revision: 1.4
You cannot comment on this entry